Adjusting The Standard Position Of The Top Feed Dog - KANSAI SPECIAL UF Series Instruction

【4】ADJUSTING THE STANDARD POSITION OF THE TOP FEED DOG
On this machine, the standard position of the top feed dog can be changed so that the
fabric is accurately fed according to sewing applications, types and/or thickness of the
fabric. This feature eliminates plyshifting during sewing.
1. C (CENTER): The top feed dog moves in the
divided-in-half mode.
This machine is factory-set in this mode.
2. B(BACK): The top feed dog moves in the
rear-fixed mode.
3. F(FRONT): The top feed dog moves in the
front-fixed mode.
■Follow the precautions below before changing the
standard position.
1. Bring the top feed dog to the extreme rear end of
its travel.
2. Do not loosen screw ②
movement adjusting lever ① and screw ③ on
the collar.
on front-to-back
4