[Awake From Power Save Mode By Touching Control Panel]; [Output Settings]; [Output Tray Settings]; [Shift Output Each Job] - Muratec MFX-C2280 User's Manual Copy Operations

Specify whether to give priority to power saving when returning from the Sleep or sub power off mode to a
mode other than the copy mode.
When returning to a non-printing mode such as the Scan/Fax mode, the temperature of the Fusing Unit in
this machine is not adjusted, by which power consumption is reduced.
You can set this option when you have selected an option other than [Copy] in [Priority Mode] that is selected
by [Administrator Settings] - [System Settings] - [Reset Settings] - [System Auto Reset].
Settings
[Power Save]
[Standard]

[Awake from Power Save Mode by Touching Control Panel]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save Settings] -
[Awake from Power Save Mode by Touching Control Panel]
Select whether to return to the normal mode without touching the Touch Panel when the machine is in Low
Power mode or Sleep mode.
If you select [ON], you can adjust the sensitivity of the sensor. Making a setting on the minus side decreases
the sensitivity (shortens the sensing distance). Making a setting on the positive side increases the sensitivity
(lengthens the sensing distance).
The default is set to [ON], and the adjustment value to [0].

[Output Settings]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Output Settings]
Configure the output settings of this machine, such as the print setting of print and received fax data, and
changing of primary output tray.
Settings
[Print/Fax Output Settings]

[Output Tray Settings]

[Shift Output Each Job]

[Output Tray Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Output Settings] - [Output Tray Settings]
Select the tray to which paper is ejected first in Copy, Print, Fax, or Print Report.
Different default values are available for different options installed on this machine.
Tips
- This item is available if the Finisher C2280FN2, or Job Separator C22802BN is installed on this ma-
chine.
[Shift Output Each Job]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Output Settings] - [Shift Output Each Job]
Specify whether to shift paper for each job before ejection.
Description of Setup Buttons (Administrator Settings)
Description
The temperature of Fusing Unit is not adjusted when the machine returns
to the normal mode.
The temperature of Fusing Unit is adjusted when the machine returns to
the normal mode.
[Standard] is specified by default.
Description
Select when to start printing received print/fax data.
For details, refer to "User's Guide [Print Operations]/[Description of Setup
Buttons (Administrator Settings)]".
Select the tray to which paper is ejected first in Copy, Print, Fax, or Print
Report.
This item is available if the Finisher C2280FN2, or Job Separator
C22802BN is installed on this machine.
For details, refer to page 17-6.
Specify whether to shift paper for each job before ejection.
This item is available if the Finisher C2280FN2 or Job Separator
C22802BN is installed on this machine.
For details, refer to page 17-6.
17
17-6