[Despeckle]
To display: [Copy] - [Application] - [No. of Originals] - [Original Settings] - [Despeckle]
Scan originals using the ADF while removing dust on the Slit Scan Glass.
It takes longer to finish scanning, compared to the normal operation.
[Blank Page Removal]
To display: [Copy] - [Application] - [No. of Originals] - [Original Settings] - [Blank Page Removal]
Blank pages contained in the original loaded into the ADF are skipped when the original is scanned.
Select this check box when scanning an original which contains blank pages. Blank pages detected are not
counted as original page.
Related setting
-
In case blank pages are not detected correctly even though scanning has taken place with [Blank Page
Removal] enabled, adjust the detection level for blank pages. For details, refer to page 16-7.
Description of Setup Buttons
15
15-20