[Image Shift] - Muratec MFX-C2280 User's Manual Copy Operations

[Image Shift]

To display: [Copy] - [Application] - [Layout] - [Image Shift]
You can fine tune the image position by shifting it in a horizontal or vertical direction according to the paper
size. When an image is printed on the back side, you can also fine tune its position.
Settings
[ON]/[OFF]
[Front Side]/[Back Side]
[Apply on Back]
[Original Direction]
Description of Setup Buttons
Description
Select [ON] to shift an image.
Adjust the image position on the print paper, by shifting the original image
in horizontal or vertical direction.
• [Shift Left]/[Shift Right]: Shifts the image to the left or right. Adjust the
shift amount by tapping [+]/[-] for the inch area, or by tapping [+]/[-] or
pressing the Keypad for the centimeter area.
• [Shift Top]/[Shift Bottom]: Shift the image upward or downward. Adjust
the shift amount by tapping [+]/[-] for the inch area, or by tapping [+]/[-
] or pressing the Keypad for the centimeter area.
Set this item to use the same settings as used on the front side for the rear
side of the print paper.
Specify the orientation of the loaded original.
15
15-41