[Staple]
To display: [Copy] - [Finishing] - [Staple]
Select the binding positions for sheet stapling.
Settings
[Corner]
[2 Position]
[Position Setting]
Tips
-
The Finisher is required to use the Staple function.
[Punch]
To display: [Copy] - [Finishing] - [Punch]
Select binding positions when punching sheets.
The number of punched holes varies depending on the country you are in.
Settings
[Position Setting]
Description of Setup Buttons
Description
Each set of printed sheets is stapled in a corner (top left or top right) before
being output.
Each set of printed sheets is stapled at two positions (in the top, left, or
right) before being output.
Select the binding position and original loading direction. If [Auto] is spec-
ified for the binding position, the binding position is determined automati-
cally based on the direction of the loaded original.
Description
Select the punch position and original loading direction. If [Auto] is speci-
fied for the punch position, the punch position is determined automatically
based on the direction of the loaded original.
15
15-12