[Card Shot] - Muratec MFX-C2280 User's Manual Copy Operations

[Card Shot]

To display: [Copy] - [Application] - [Others] - [Card Shot]
When you want to copy cards, you can arrange the front and back sides of the card on the same side of a
single page and print them onto one sheet.
Settings
[ON]/[OFF]
[Original Size]
[Layout]
[Zoom]
d
Reference
For details about the operation procedure of [Card Shot], refer to page 8-2.
Related setting
- A card size can be registered, and the default [Layout] and [Zoom] values can be changed. For details,
refer to page 16-14.
Description of Setup Buttons
Description
Select [ON] to specify Card Shot.
Specify the size of the card to copy by tapping [+]/[-] for the inch area, or
by tapping [+]/[-] or pressing the Keypad for the centimeter area. From the
[Registered Paper Size], you can recall a size previously stored and specify
the size.
Select the layout for arranging the front side and back side of the card on
the paper from [Top/Bottom], [Left/Right (Top Half)], and [Left/Right].
Select a zoom ratio for copying.
• [Full Size]: Copy by enlarging according to the paper size.
• [x1.0]: Copy with the same size as the card.
15
15-64