Low Power Mode; Sleep Mode - Muratec MFX-C2280 User Manual

The Power key can be used as a power save key to manually switch to Power Save mode. Power Save mode
is classified into two modes: Low Power mode and Sleep mode.
- Press the Power key to select whether to switch to Low Power or Sleep mode (default: [Low Power]).
For details, refer to "User's Guide [Copy Operations]/[Description of Setup Buttons (Administrator Set-
tings)]".
- To use the Power key as a Sub Power Off key, change the Power key setting (default: [Power Save]).
For details, refer to "User's Guide [Copy Operations]/[Description of Setup Buttons (Administrator Set-
tings)]".
When the Power key is pressed, the status of this machine changes as shown below. Depending on how
long the Power key is pressed, the state of the power save mode to be activated will differ.
Power key
Short press
Hold down
Related setting (for the administrator)
- Select whether to return to the normal mode without touching the Touch Panel when the machine is in
Low Power mode or Sleep mode. Also, you can adjust the sensitivity of the sensor as necessary (De-
fault: [ON], Adjustment value: [0]). For details, refer to "User's Guide [Copy Operations]/[Description of
Setup Buttons (Administrator Settings)]".
Turning the Power On or Off
Short press
Hold down
Status of this ma- Status of
chine LED

Low Power mode

Flash:
(Default value) Blue

Sleep mode

Flash:
Blue
Sub Power OFF Light up:
Orange
Power Saving
Effect: Low
(Low Power mode)
Sleep Mode
Power Saving
Sub Power OFF Effect: High
Description
Turns off the display of the Touch Panel to re-
duce power use.
This machine returns to the normal mode when
it receives data or faxes or when the user oper-
ates the Touch Panel.
Provides power-saving effect higher than Low
Power mode. A time required to return to the
normal mode is longer than Low Power mode.
This machine returns to the normal mode when
it receives data or faxes or when the user oper-
ates the Touch Panel.
The power saving effect is the same as that of
the sleep mode.
While the sub power is turned off, this machine
can receive data or faxes, however, it cannot
scan or print an original.
If data or faxes are received while the sub power
is turned off, they are printed when the machine
returns to the normal mode.
To enable the machine to return to the normal
mode from the Sub Power Off status, press the
Power key again.
4
4-4