Ethernet Interface Model - Oki PH640 User Manual

11-4. Ethernet Interface Model
ON
OFF
No. 1 2 3 4 5 6 7 8
Switch
1-1 Emulation
1-2 STAR line mode
ESC/POS mode
1-3 Should not be changed (Should be set to on)
1-4 Sensor adjustment
1-5 Should not be changed (Should be set to on)
1-6 Handshaking conditions (conditions for
BUSY)
1-7 ASB Function *1)
1-8 Star Line Mode
ESC / POS Mode
1-9 Low-power consumption mode
1-10 Validation status in standby condition print-
ing
The factory settings of DIP switch are all on.
Switch
2-1~2-4
The factory settings of DIP switch are all on.
9 10
DIP-SW 1
Function
Reserved
Resolution correc-
tion
NSB Function *2)
Reserved
Function
Always ON
ON
OFF
No. 1 2 3 4
DIP-SW 2
DIP-SW 1
STAR line mode
Always ON
203 dpi
Invalid
Offline or receive
buffer full
Valid
Valid
Should not be changed (Should be set to on)
Invalid
Opening the platen
DIP-SW 2
– 62 –
ON
ESC/POS mode
180 dpi
Valid
Receive buffer full
Invalid
Invalid
Valid
Closing the platen
ON
Should be set to on
OFF
OFF