Usb/Poweredusb And Ethernet; Usb/Poweredusb Interface Specifications; Ethernet Interface Specifications - Oki PH640 User Manual

14. USB, Powered USB and Ethernet
14-1. USB and Powered USB Interface Specifications
(1) General Specification:
(2) Communication Speed:
(3) Communication Method:
(4) Power Specifications:
(5) Connector:

14-2. Ethernet Interface Specifications

(1) General Specification:
(2) Communication Media:
(3) Communication Speed:
(4) Protocol:
(5) TCP/IP detail:
(6) Connector:
Note: Factory-set login password for administrator
One of the following protocols may be used for changing the settings on this product:
HTTP (web), TELNET, or FTP. To do so, it is necessary to log in using an adminis-
trator account for the product.
Use the following administrator account information on HTTP (web), TELNET, or
FTP.
Conforms to USB 2.0 Specifications
USB Full Speed Mode (12 Mbps)
USB Bulk Transmission Mode
USB Self-power Function
USB: USB Up-Stream Port Connector (USB Type-B)
PoweredUSB: 1 × 8 right-angle type
Conforms to IEEE802.3
10 Base-T/100 Base-TX
10/100 Mbps
TCP/IP
ARP, RARP, BOOTP, DHCP, LPR, #9100, FTP,
HTTP, TELNET, TFTP
RJ-45 (8-pin modular)
Administrator account name:
Password:
The password may be changed after logging in.
"root" (required)
"public" (required)
– 68 –