Usb/Poweredusb Interface Model - Oki PH640 User Manual

11-3. USB / PoweredUSB Interface Model
ON
OFF
No. 1 2 3 4 5 6 7 8
Switch
1-1 Emulation
1-2 STAR line mode
ESC/POS mode
1-3 Should not be changed (Should be set to on)
1-4 Sensor adjustment
1-5 USB mode
1-6 Handshaking conditions (conditions for
BUSY)
1-7 ASB Function *1)
1-8 Star Line Mode
ESC / POS Mode
1-9 Low-power consumption mode *3)
1-10 Validation status in standby condition printing
*3) The settings will be invalid (always low-power consumption mode) when a Powered USB
is being used.
The factory settings of DIP switch are all on.
Switch
2-1~2-4
The factory settings of DIP switch are all on.
9 10
DIP-SW 1
Function
Reserved
Resolution correc-
tion
NSB Function *2)
Reserved
Function
Always ON
ON
OFF
No. 1 2 3 4
DIP-SW 2
DIP-SW 1
STAR line mode
Always ON
203 dpi
Invalid
Printer class
Offline or receive
buffer full
Invalid
Valid
Should not be changed (Should be set to on)
Invalid
Opening the platen
DIP-SW 2
ON
Should be set to on
– 61 –
ON
ESC/POS mode
180 dpi
Valid
Receive buffer full
Valid
Invalid
Valid
Closing the platen
OFF
OFF
-