Self-Printing - Oki PH640 User Manual

6-3. Self-Printing

6-3-1. Test Printing
• Using Thermal paper roll
(1) Place a paper roll on the printer.
(2) With the rear cover closed, turn the power switch ON while keeping the FEED button
depressed.
(3) The printer will run a test print in the following order: version number, DIP switch
settings, memory switch settings, etc.
After the test print is completed, the printer will revert to the normal mode.
• Using Slip paper
(1) With the front cover closed, turn the power switch ON while keeping the RELEASE
button depressed.
(2) Insert a paper into the slip slot. The printer will automatically feed the paper; then, it
will run a test print.
The printer will run a test print in the following order: version number, DIP switch
settings, memory switch settings, etc.
After completing the test print, the printer will release the paper and revert to the
normal mode.
– 31 –