Ethernet Interface Model - Oki OkiPos 407II User Manual

11-4. Ethernet Interface Model
ON
OFF
No. 1 2 3 4 5 6 7 8
Switch
- Command emulation (Ster Line mode)
- Should not be changed (Should be set to on)
- Should not be changed (Should be set to on)
- Sensor adjustment
- Should not be changed (Should be set to on)
-6 Handshaking conditions (conditions for
BUSY)
- Should not be changed (Should be set to on)
- Should not be changed (Should be set to on)
- Low-power consumption mode
-0 Should not be changed (Should be set to on)
The factory settings of DIP switch are all on.
Switch
-~-
The factory settings of DIP switch are all on.
9 10
DIP-SW 1
Function
Function
Always ON
ON
OFF
No. 1 2 3 4
DIP-SW 2
DIP-SW 
Always ON
Invalid
Offline or receive
buffer full
Invalid
DIP-SW 
–  –
ON
Valid
Receive buffer full
Valid
ON
Should be set to on
OFF
OFF