This document describes how to install the printer drivers and associated software for the case when running the installer displays the following screen (*1). (*1) If the following installer screen (*2) appears instead, please refer to "PT330-331_InstallGuide2_en.pdf" located in the "Manual" folder. (*2) Screen (*1) appears when you start the installer if .NET Framework 2.0 is already installed on your...
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 2 Installer 2.1 Overview This installer program is used to install the Windows driver, OPOS driver, and other software. You can also use it to view the manual. 2.2 Installed software This installer is used to install the following drivers and software.
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 2.4 System requirements This installer runs on the following operating systems. Product name Edition Language Abbreviations Professional Windows 2000 Microsoft® Windows® 2000 Server Professional Windows XP Microsoft® Windows® XP Home Edition Enterprise Business Microsoft® Windows Vista®...
Right-click the "PT330-331 Raster" printer and then click [Printer / Server 2008 R2 Properties]. Right-click the "PT330-331 Raster" printer and then click [Run as administrator] [Properties]. Windows Vista * If you logged on to Server 2008 using the built-in administrator / Server 2008 account, right-click the "PT330-331 Raster"...
Page 7
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 All programs Procedure Click the Windows logo button in the lower-left corner of the Windows 7 / Vista desktop screen and then click [All Programs]. Server 2008 R2 / Server 2008 / Windows XP Select [Start] ...
When you install a driver, you must log on using an account with Administrative privileges. If the printer drivers or associated software are already installed: If the drivers and software for the PT330/PT331 printer are already installed on your computer, uninstall them before proceeding.
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 3.3 Installation procedures 3.3.1 Driver Installation Use the following procedure to install the software. * If the [User Account Control] dialog box is displayed, click [Yes] or [Continue]. For Windows 7/Windows Vista/Server 2008 R2/Server 2008 Insert the "PT330-331"...
Page 10
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 Click “Install Driver”. (1) Select the software you want to install. (2) If you want to install the Windows driver, click the interface being used. (3) Click [Install]. * For install the OPOS Driver or...
Page 11
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 *1) When using the OPOS driver with a USB or Parallel interfece The new hardware is detected automatically when you turn on the printer. Please follow the instructions below. For Windows 7 / Server 2008 R2 (1)The message "Installing device driver software"...
Page 12
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 For you install the Windows driver on a USB Click “Next”. Click “Finish”. Connect the PC and printer, then turn the printer’s power on. For Windows 7/Windows Vista/Server 2008 R2/Server 2008 The message "Installing device driver software"...
Page 13
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 *2) When the "Found New Hardware Wizard" is displayed: For Windows XP/Windows 2003/WEPOS/WEPOS 2009 (1) The "Found New Hardware Wizard" screen is displayed. Select [No, not this time] and then click [Next]. (2) When "What do you want the wizard to do?" is displayed, select [Install the software automatically] and then click [Next].
Page 14
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 For you install the OPOS driver or Windows driver on a Serial or LAN Installation Complete. (1) Windows driver installation This message is displayed after the Windows driver or OPOS driver installation completes. Follow the on-screen instructions and click [Yes].
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 3.3.2 Software Utilities Use the following procedure to install the software utilities. Click “Install Printer Utility” or “Install Status Monitor”. If the screen on the left appears during the installation, follow the instructions in the wizard to install Printer Utility or Status Monitor.
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 3.3.3 Network Software Use the following procedure to install or run the network software. Click “Run Quick Setup”, “Install Admin Manager” or “Install PR-Port Manager”. If the screen on the left appears during the installation, follow the instructions in the wizard to install Printer Utility or Status Monitor.
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 4 How to Check the Installation 4.1 Windows driver 4.1.1 Installation confirmation Use the following procedure to confirm that the Windows driver installed successfully. Open the [Printer Folder] (*) screen. * See the [Printer folder] procedure in "3.1 How to use...
Page 18
If you do not set the shared printer, follow the instructions below. (1) Open the [Printer Folder] (2) Open the "PT330-331 Raster" properties, and then click the [Sharing] tab. (3) Select [Do not shre this printer], and then click [OK].
Page 19
(2) Perform the following steps for the OS you are using. For Windows 7/Server 2008 R2 • Right-click the "PT330-331 Raster" printer in the printers and faxes section and then click [See what's printing]. If the [Use Printer Offline] checkbox in [Printer] is selected, clear it.
Page 20
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 When using a USB interface connection The USB port may vary depending on your system configuration. Use the following procedure to change the printer driver setting and confirm it by printing a test page.
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 4.2 OPOS driver 4.2.1 Installation confirmation Use the following procedure to confirm that the OPOS driver installed successfully. * If the [User Account Control] dialog box is displayed, click [Yes] or [Continue]. From All Programs (*), click [Okidata] ...
Page 22
How to specify the printer port For a serial port connection Select “PT330-331SERPRT” or “PT330-331SER2PRT” in [Device Name]. Select the connected port name (e.g. COM1) in [Port Name]. For a USB port connection Select “PT330-331USBPRT”...
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 4.2.2 Check serial number Use the following procedure to check the serial number. (1) Load paper in the printer and then close the cover. (2) Turn the power on while holding down the FEED button. Keep holding it down until printing starts.
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 4.3 Utility Use the following procedure to launch the Utility. * If the [User Account Control] dialog box is displayed, click [Yes] or [Continue]. Click All Programs (*) [Okidata] [Utility] [PT330-331 Utility].
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 4.4 Status Monitor Use the following procedure to launch the Status Monitor. * If the [User Account Control] dialog box is displayed, click [Yes] or [Continue]. Click All Programs (*) [Okidata] [Status Monitor] [PT330-331 Status Monitor].
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 4.5 PR-Port Manager Use the following procedure to start PR-Port Manager (Popup Status Monitor). * If the [User Account Control] dialog box is displayed, click [Yes] or [Continue]. Click All Programs (*) [Okidata] →...
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 4.6 Admin Manager Use the following procedure to start AdminManager. * If the [User Account Control] dialog box is displayed, click [Yes] or [Continue]. Click All Programs (*) [Okidata] → [AdminManager] [AdminManager].
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 5 Uninstallation 5.1 Windows driver Use the following procedure to remove the Windows driver. 5.1.1 For Windows 7/Server 2008 R2 If the [User Account Control] dialog box is displayed, click [Yes]. Uninstall procedure: Open the [Printer Folder] (*).
Page 29
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 Select an installed printer (such as "Fax" or "Microsoft XPS Document Writer") in the [Printers and Faxes] section and then click [Print server properties]. For Windows 7 Click the [Drivers] tab and then click [Change Driver Settings].
Page 30
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 Select [Remove driver and driver package.] and then click [OK]. Click [Yes]. Click [Delete]. Click [OK] after driver removal completes and then click [Close] to exit the [Print Server Properties] dialog box. Then, turn off the printer and restart your computer.
* If you logged on to Server 2008 using the built-in administrator account, select [Files] [Server Properties]. (6) Click the [Drivers] tab, select "PT330-331 Raster" from the "Installed printer drivers" list, and then click [Remove]. (7) When the [Remove Driver And Package] screen is displayed, select [Remove driver and driver package.], and then click [OK].
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 5.2 OPOS driver and other software Use the following procedure to remove software. The following uses the OPOS driver as an example. The procedure for removing the other software is the same. * If the [User Account Control] dialog box is displayed, click [Yes] or [Continue].
Page 33
PT330/PT331 Printer Driver Installation Guide-1 1.0.0.1 *1) The program names for the Utility and Status Monitor are as follows. Utility : PT330-331 Utility Status Monitor : PT330-331 StatusMonitor PR-PortManager : PR-PortManager AdminManager : AdminManager *2) The folders to be deleted for the Utility and Status Monitor are as follows.
Need help?
Do you have a question about the PT330 and is the answer not in the manual?
Questions and answers