Loading The Slip Paper Or Validation Paper - Oki PH640 User Manual

4-3. Loading Slip Paper or Validation Paper
Before printing, make sure the ribbon cassette is in the printer. (See "4-1. Load-
ing the Ribbon Cartridge" for details.)
Insert the paper as follows:
(1) Turn the printer power switch ON.
(2) Insert the paper as illustrated below. Facing the printer, insert the paper straight, while
sliding the right end of the paper against the right end of the slip paper slot. Alternatively,
insert the paper straight from the top.
Note: Sliding the paper diagonally can cause a paper jam. If the paper gets jammed, press
the RELEASE button to remove the paper. Then, insert the paper again.
(See "8-2. Removing Paper Jam" for details.)
Inserting Slip Paper
Inserting Validation Paper
(3) When the printer detects a paper, it automatically feeds the paper and starts printing.
(4) After completing printing, the printer will automatically release the paper.
Note: Be sure to use a type of paper that matches the printer's specifications. (See "5-2-1.
Specifications".) Do not use paper that is curled, kinked, wrinkled, warped, or
torn.
2
1
2
– 20 –
1