Lan Setup Settings (Printer With Triple Interface Model) - Oki PT340 User Manual

Hide thumbs Also See for PT340:

Table of Contents

Available languages

9-4. LAN Setup Settings (Printer with triple interface model)

Ensure that paper is set in the printer. Turn off the power switch on the printer,

then turn it on again while pressing the FEED button on the control panel. This

outputs the printout shown in section 9-1.

Then Press the FEED button three times (to select 3. LAN Setup Menu)

enters setup mode and prints the following menu.

LAN Setup Menu

Press FEED button for the number of times

as the same as your selecting item, and

wait more than 1 second.

Continue to press FEED button more than

Settings have the same operation method as described in paragraph 9-2.

2.Setup Print

3.Save & End

4.Default Set

Table of Contents