Disassembling The Drive; Disassembling The Handwheel And Handwheel Flange; Disassembling The Cover - DURKOPP ADLER 827 Service Instructions Manual

Integrated motor

18.2 Disassembling the drive

18.2.1 Disassembling the handwheel and handwheel flange

Fig. 60: Disassembling the handwheel and handwheel flange
(1) - Handwheel
(2) - Screws
To disassemble the handwheel and handwheel flange:
1. Loosen all 3 screws (2) on the handwheel (1).
2. Loosen all threaded pins (3) and disassemble the handwheel

18.2.2 Disassembling the cover

Fig. 61: Disassembling the cover
(1) - Screws
(2) - Cover
To disassemble the cover:
1. Loosen all 5 screws (1).
2. Disassemble the cover (2) from the side.
Service Instructions 827/827-M - 01.0 - 05/2019
①
②
flange (4).
①
②
④
③
(3) - Threaded pins
(4) - Handwheel flange
①
③
(3) - Handwheel flange
79