Intel Pentium OverDrive Installation Manual page 5

Step 1 - Install the diskette software and view
the animated demo.
Intel includes a Demonstration and Diagnostics Diskette with your Pentium
OverDrive processor. The diskette contains two portions:
• a demonstration to guide you through the Pentium OverDrive
processor installation procedure.
• diagnostics to test your Pentium OverDrive processor for
proper installation and operation.
To view the demo, your computer must be equipped with a VGA video board
and monitor, and you need to install the diskette software on your system.
Installing the Diskette Software
You can use DOS* or Windows* to install the software on the diskette. The
full set of utilities takes 1.1 MB on your hard disk if you install it using DOS
and 1.2 MB if you install it using Windows. If you install the software from
DOS, you are asked if you wish to approve modification of the
file. Intel recommends that you choose OK.
The installation program also asks you if you wish to only install the Fan
Monitor portion of the diagnostic software. If you want to install the fan test
software to your hard drive but do not desire the demonstration or post-install
diagnostics, choose this option.
Installing the software program to view the demo also
places the diagnostic utilities on your hard disk. Intel
provides you with a utility to remove the diskette
software from your hard disk once you have completed
your Pentium OverDrive processor installation and
diagnostics. For more information on this utility or on
the diagnostic software, see the section Demonstration
and Diagnostics Diskette.
6
AUTOEXEC.BAT