Installation - Intel Pentium OverDrive Installation Manual

Step 8 - Test the Pentium OverDrive processor

installation.

You can test your installation by either running a software program you use
frequently and experiencing the increased performance, or by using the
diagnostics on the diskette included in your Pentium OverDrive processor
package. If you installed the diskette software to view the animated demo
prior to this step, you do not need to reinstall the software at this time. To use
the diagnostics:
For DOS users
For Windows NT users
For Windows users:
For OS/2, OS/2 WARP users:
For more information,
refer to Troubleshooting
section, p. 26.
For Windows 95 users:
When the Main Menu appears, select "Intel OverDrive
tics." If the diagnostic utilities program tells you the Pentium OverDrive
processor is not operating correctly or if you do not obtain any performance
increase, see the Troubleshooting section to determine possible problems. If
you cannot troubleshoot the problem, contact your dealer for assistance. If
you require further assistance, see the Getting Help section.
Your Intel Pentium OverDrive processor installation is com-
plete.
Go to the odp_util directory and type:
overdriv e
Go to the odp_util directory and
type from a full-screen DOS
prompt:
overdriv e
Double click the icon "OverDrive
Processor Demo/Diagnostics"
Ensure that the following line ap-
pears in your config.sys file:
VME=NO
Ensure that the settings for your DOS
full-screen command prompt in-
cludes the following:
HW_TIMER set to ON
From a full-screen DOS prompt type:
overdriv e
Press e or click OK
19
®
Processor Diagnos-
®