Intel Pentium OverDrive Installation Manual page 17

Step 6 - Set jumpers or switches, if required.
You may need to set switches, move or install jumpers or both on your
computer's motherboard or removable card to let the computer know you've
added the Pentium OverDrive processor. See your computer owner's manual
for more information. If your manual does not have a configuration section
for the Pentium OverDrive processor, contact your computer manufacturer's
technical support group.
Once you have configured your computer, proceed to Step 7.
Step 7 - Start your computer and run the
computer's setup program.
Put the cover back on the system unit. Reconnect all the cables and cords, and
plug the power cord into the wall outlet.
Turn on your computer. If your computer requires it, run the computer's setup
or configuration program. Refer to your computer owner's manual.
If you have problems with your computer after installing the Pentium
OverDrive processor, turn to Troubleshooting.
Now you are ready to test the Pentium OverDrive processor.
Proceed to Step 8.
In most cases, if you have correctly oriented the Pentium
OverDrive processor, starting your computer does not
damage the processor or your computer even if jumper
or switch changes are required—the system simply
does not function correctly.
18