Installation And Setup Overview; Physical Connection - Xerox Color C60 User Manual

Installation and Setup
• the name and location of your company
To learn the serial number of the printer, follow these steps:
1. On the Control Panel, press Machine Status.
2. The Machine Information tab appears. The serial number is displayed on the left
side of the touch screen.
Note
If the serial number cannot be read from the printer's touch screen, it can also be
found on the machine frame inside the lower left cover of the printer.
If you need any additional help using your printer:
• Refer to this User Guide.
• Contact the Key Operator.
• Visit our Customer Website at
C60/C70 Printer in the Search or Choose field and select the desired documentation)
or contact the Xerox Welcome Center.

Installation and Setup Overview

Before you can use the printer, you must:
1. Make sure the printer is connected correctly and switched on.
2. Install software print drivers and utilities.
3. Configure the software.
Note
Instructions for installing the print drivers, utilities, and setting up the network are
provided in the System Administrator's Guide.
Locate the System Administrator Guide at www.xerox.com/support. Enter Xerox Color
C60/C70 Printer in the Search or Choose field and select the desired documentation.

Physical Connection

You can connect to the printer over a network. Connect to a functioning and dedicated
fax telephone line for the optional fax. Communication cables are not included with the
printer and must be purchased separately.
To physically connect the printer:
1. Connect the power cable to the printer, and plug it into an electrical outlet.
2. Connect one end of a Category 5 (or better) Ethernet cable to the Ethernet port on
the left side of the printer. Connect the other end of the cable to your network drop.
3-2
www.support.xerox.com/support (enter Xerox Color
Xerox ® Color C60/C70 Printer
User Guide