Fault Code
Possible Cause
012-115012-
Finisher jam or fault.
264012-302
Specifications
Item
Paper Size
Trim Capacity
Paper Weights
Xerox
®
Color C60/C70 Printer
User Guide
Recommended Solution
1. If machine's UI continues to reflect
2. Follow the instructions shown on
3. If fault persists, power off/on the
4. If fault persists, call for service.
Specifications
• Maximum: 13x18 in. (330x457 mm)
• Minimum: 8.5x11 in./A4 SEF
Note
The SquareFold Trimmer Module requires both Interface Module
and the Booklet Maker Finisher.
• 5-20 sheet booklet (up to 80 imaged sides) at 24 lb. (90 gsm)
• 5-25 sheet booklet (up to 100 imaged sides) at 200 lb. (79
gsm)
• Cut amount: 2-20mm, adjustable in 0.1 mm increments
16 lb. bond-90 lb. cover (60-220 gsm)
SquareFold Trimmer Module
a fault/jam, open the finisher and
remove any jams. Close the finisher
covers.
the machine's UI to resume print-
ing.
machine.
14-17