Yealink W52P User Manual page 27

The phone can obtain the provisioning server address by detecting DHCP options 66/
contacting RPS/Phone Flash when it is powered on, and then the phone will perform the
auto provisioning process to download configuration files.
To trigger auto provisioning via power on:
1. Press to enter the main menu.
2. Select ->System Settings->Base Restart.
3. Enter the system PIN (default: 0000).
4. Press the Done soft key.
If successful, the phone will complete deployment after the base restarts. Then you
can access the features you configured on the CommPortal phone configurator via
your phone.
You can use Auto Provision Now method to manually trigger the IP phone to perform the
auto provisioning process immediately.
To use the Auto Provision Now mode via phone user interface:
1. Press to enter the main menu.
2. Select ->System Settings->Auto Provision.
3. Enter the system PIN (default: 0000) and press the Done soft key.
4. Depending on the authentication method you choose:
- If you are using MAC authentication method to deploy your phone.
1) Press OK soft key twice to skip the Username and Password fields.
- If you are using Http authentication method to deploy your phone.
1) Enter the valid value in the Username field and press the OK soft key.
2) Enter the valid value in the Password field and press the OK soft key.
The LCD screen prompts "Update now?".
5. Press the Yes soft key to perform an update or press the No soft key to cancel.
After a while, you can access the features you configured on the CommPortal
phone configurator via your phone.
To use the Auto Provision Now mode via web user interface:
1. Open a web browser on your computer.
2. Enter the base IP address in the browser's address bar, and then press the Enter
key.
Downloading Configuration Files
19