Yealink W52P User Manual page 21

Ip dect phones integrated with metaswitch commportal phone applications

Hide thumbs Also See for W52P:

Table of Contents

The network contact information will be deleted from all handsets registered on the

same base simultaneously.

You can also delete all contacts by pressing the Options soft key, and then select Delete

All.

Network contacts can be updated in following situation:

After the configured interval of automatic update (default interval: 60 minutes).



Update immediately



Reboot the phone.



To update network contacts immediately:

Do one of the following.

Press

Select the desired group and then press the Enter soft key to load the directory.

Press the Options soft key, and then select Update from the prompt list.

The contact information will be updated to all handsets registered on the same

base simultaneously.

You can access the network call list through the handsets. Each call list entry contains

call information such as remote party identification, date & time and duration. You can

check call entries and place a call from the call list. The network call list allows you to

view and dial the stored numbers in the following lists: All Calls, Outgoing Calls, Missed

calls and Accepted Calls. You can also add a contact from the network call list.

Note

Before configuring the network call list feature, make sure you have correctly configured

Commportal. For more information on configuring Commportal, refer to

CommPortal Feature

You can access the network call list through the handsets. When subscriber makes a call,

receives a call or misses a call, the details of the call are logged in the CommPortal. All

handsets registered on the same base will share the same network call list.

->Network Contacts.

->Network Contacts

on page 1.

Configuring CommPortal Phone Applications

Configuring the

Table of Contents