To search for a contact in the Network Contacts:
1.
Do one of the following.
-
Press
->
-
Press
->Network Contacts.
2.
Enter a few continuous characters of the contact name or continuous digits of the
contact number using the keypad.
You can press
The contacts whose name or phone number matches the criteria entered will
appear on the IP phone LCD screen. You can dial from the result list.
To place a call to a contact in the Network Contacts:
1.
Do one of the following.
-
Press
->
-
Press
->Network Contacts.
2.
Select the desired group, and then press the Enter soft key to load the directory.
3.
Select the desired contact.
4.
Press
.
-
If only one number is stored for the contact, the contact number will be dialed
out directly.
-
If multiple numbers are stored for the contact, press
the desired number, and then press
Configuring CommPortal Phone Applications
->Network Contacts.
to switch the input method.
->Network Contacts.
or
to dial out the number.
to highlight
11