Downloading Configuration Files; Phone Flash - Yealink W52P User Manual

When CommPortal phone applications and CommPortal authentication information are
configured already, users can perform auto provisioning to download all the
configuration files from the CommPortal phone configurator.
Yealink IP phones support MAC authentication method to deploy phones. For more
information on MAC authentication, refer to: www.metaswitch.com.
Yealink IP phones also support HTTP digest authentication as defined in RFC 2617 to
deploy phones. The system administrator only needs to provide authentication user
name and password to the users, and then users can complete phone deployment on
their own.
Yealink W52P phones support many ways to obtain the provisioning server address
(e.g., by detecting DHCP options 66/contacting Redirection & Provisioning Server
(RPS)/Phone Flash).
When using DHCP option 66 or RPS to obtain the provisioning server address, make sure
DHCP server or Redirection & Provisioning server has been configured in advance.
Yealink IP phones support obtaining the provisioning server address from the IP phone
flash. To obtain the provisioning server address by reading the IP phone flash, make
sure the configuration is set properly.
To configure the IP phone flash via web user interface:
1. Open a web browser on your computer.
2. Enter the base IP address in the browser's address bar, and then press the Enter
key.
3. Enter the user name and password in the login page.

Downloading Configuration Files

17