Configuring The Update Mode; Power On; Auto Provision Now - Yealink W52P User Manual

Ip dect phones integrated with metaswitch commportal phone applications

Hide thumbs Also See for W52P:

Table of Contents

CommPortal Phone Applications User Guide for Yealink SIP Phones

Click on Phone->Auto Provision.

Enter the URL, user name and password of the provisioning server in the Server URL,

User Name and Password fields

(For MAC authentication, leave the User Name and Password fields blank. For Http

authentication, user name and password are needed).

Click Confirm to accept the change.

After the above configuration is completed, you can use Power On or Auto Provision

Now method to trigger the IP phone to connect to the configured provisioning server

and perform the auto provisioning process. For more information on these methods,

refer to

Configuring the Update Mode

The update mode is used to set the desired time to trigger the IP phone to perform the

auto provisioning process. Yealink W52P phones support many update modes. Here we

take the followings as examples to introduce how to trigger the phone to perform auto

provisioning:





on page 18.

Table of Contents