CONFIGURING OUTBOUND ROUTE PRIVILEGE
When creating a new outbound rule under PBX->Basic/Call Routes->Outbound Routes, users shall see
"Privilege Level" option with four levels in the drop down list.
When making an outbound call via this route from an UCM6100 extension, the UCM6100 will compare the
extension's permission level with the outbound route's privilege level. If the extension's permission level is
higher than (or equal to) the outbound route's privilege level, the call will be allowed to go through.
Please see more descriptions below:
Internal: The lowest level required. All users can use this rule.
Local: Users with Local, National, or International level are allowed to use this rule.
National: Users with National or International level are allowed to use this rule.
International: The highest level required. Only users with international level can use this rule.
Firmware Version 1.0.1.25
Figure 2: Create an Outbound Route on UCM6100
Configuring Permission/Privilege Level Settings on UCM6100
Page 5 of 7