Changing Viewer Password
1. Access your HT818 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings → New Viewer Password and enter the new viewer password.
5. Confirm the new viewer password.
6. Press Apply at the bottom of the page to save your new settings.
Changing HTTP Web Port
1. Access your HT818 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings → HTTP Web Port.
5. Make sure that the Web Access Mode is set to HTTP.
6. Change the current port to your desired/new HTTP port. Ports accepted are in range [1-65535].
7. Press Apply at the bottom of the page to save your new settings
Configuring HT818 through Voice Prompts
As mentioned previously, The HT818 has a built-in voice prompt menu for simple device configuration.
Figure 7: Viewer Level Password
Figure 8: Web HTTP Port
HT818 User Guide
Version 1.0.10.6
P a g e
|
23