In Print Server Mode Using The Netware 4.X Bindery Emulation; In Netware 4.X Remote Printer Mode (Nds) - Muratec MFX-C2828 User Manual

5.7 Printing (Netware)
Item
[IPX Setting]
[Ethernet Frame
Type]
[NetWare Print
Mode]
[Print Server Name]
[Printer Number]

In Print Server mode using the NetWare 4.x Bindery Emulation

0 When you use the Bindery Emulation, make sure that the Bindery Emulation has been enabled on the
NetWare server.
0 When you select the Print Server mode, the IPX protocol must already be loaded on the NetWare server.
1
From the client, log in the NetWare file system as Bindery with the administrator authority.
2
Start Pconsole.
3
Select [Quick Setup] from [Available Options] list box, and press the Enter key.
4
Fill in [Print Server Name], [Printer Name], and [Print Queue Name]. Set the [Type] of the printer to [Oth-
er/Unknown], and save them.
5
Terminate Pconsole by pressing the Esc key.
Then, configure the following settings in [NetWare Setting].
Item
[IPX Setting]
[Ethernet Frame
Type]
[NetWare Print
Mode]
[Print Server Name]
[Print Server Pass-
word]
[Polling Interval]
[Bindery/NDS Set-
ting]
[File Server Name]

In NetWare 4.x Remote Printer mode (NDS)

1
From the client, log in the NetWare file system with administrator authority.
2
Start NWAdmin.
3
Select an organization or department container for the print service, and select [Print Services Quick
Setup] from the Tools menu.
4
Fill in [Print Server Name], [Printer Name], [Print Queue Name], and [Print Queue Volume]. Then, set the
[Type] of the printer to [Other/Unknown] and save them.
Description
Select [ON].
Select a frame type to be used.
Select [Nprinter/Rprinter].
Enter a print server name to be operated as the Nprint-
er/Rprinter (up to 63 characters, excluding / \ :; , * [ ] < > |
+ = ? .).
Enter the Nprinter/Rprinter number.
Description
Select [ON].
Select a frame type to be used.
Select [PServer].
Enter a print server name to be operated as Pserver (up to
63 characters, excluding / \ :; , * [ ] < > | + = ? .).
Enter a print server password if necessary (up to 63 char-
acters).
Set a job inquiry interval.
Select [NDS/Bindery Setting].
Enter the priority file server name to be used in the Bindery
emulation mode (up to 47 characters, excluding /\ :; , * [ ]
< > | + = ? .).
5
Prior check
Frame type
The print server
name specified in
Step 4
Prior check
Frame type
The print server
name specified in
Step 4
5-12