9.2
Linking an OpenAPI system with this machine
9.2.4
[OpenAPI Setting]
In the administrator mode of Web Connection, select [Network] ö [OpenAPI Setting].
Item
[Use SSL/TLS]
[Port Number]
[Port No.(SSL)]
Reference
-
If [Enhanced Security Mode] is enabled, [Use SSL/TLS] is set to [SSL Only].
-
When you use Authentication Manager for authentication from the printer driver, set [System Connec-
tion] ö [OpenAPI Settings] ö [Authentication] to [OFF] in [Administrator Settings] on the Control Pan-
el.
-
If you select [OK] after changing multiple port numbers together in Web Connection or on the Control
Panel, a port number duplication error may be displayed. When this error is displayed, first change one
port number and select [OK]. Then change another one and select [OK].
Description
To use SSL encryption, select [SSL Only] or [SSL/Non-
SSL].
Enter a port number.
Enter the port number to be used for SSL communication.
9
Prior check
Do you use
SSL/TLS?
9-6