Restricting Users Of This Machine (Windows Domain Or Workgroup); Tcp/Ip Settings] - Muratec MFX-C2828 User Manual

7.3

Restricting users of this machine (Windows domain or workgroup)

7.3 Restricting users of this machine (Windows domain or work-
group)
Configure settings to restrict users who can use this machine by NTLM authentication.
These settings are required if you wish to use NTLM authentication when using the Windows NT 4.0 system
or when using Active Directory (NT-compatible domain environment) in the Windows Server system. You can
restrict the functions available to each user.
You can also restrict users who can use this machine by NTLM authentication in an IPv6 environment con-
figured by the Active Directory function (NT-compatible domain environment) of Windows Server 2008/Server
2008 R2.
To use NTLM authentication in the IPv6 environment, you must enable the Direct Hosting service. To resolve
the names using a DNS server, prepare the DNS server and configure the DNS settings of this machine.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
Do you use a WINS server?
[WINS Setting]
7.3.1

[TCP/IP Settings]

Configure settings to use this machine in the TCP/IP network environment.
- To perform NTLM authentication in an IPv6 environment configured by the Active Directory function
(NT-compatible domain environment) of Windows Server 2008/Server 2008 R2, configure IPv6. For de-
tails on the IPv6 settings, refer to page 2-5.
- To use NTLM authentication in the IPv6 environment, you must enable the Direct Hosting service. To
resolve the names using a DNS server, prepare the DNS server and configure the DNS settings of this
machine.
For details, refer to page 2-2.
No
Yes No
[TCP/IP Settings]
[External Server Settings]
[General Settings]
[Administrative Setting]
[Default Function Permis-
sion]
[Client Settings]
In an IPv6 environment?
Finish
7
Yes
[Direct Hosting Setting]
7-15