10.5
Reporting the status of this machine (by e-mail)
Item
[Replenish Toner]
[Finisher Tray Full]
[Service Call]
[Job Finished]
[Hole-Punch Scrap
Box Full]
[Waste Toner Box
Full]
[Drum Unit/Devel-
oping Unit Life]
[Fusing Unit Yield]
[Transfer Roller
Yield]
[Transfer Belt Unit
Yield]
[Ozone Filter Yield]
10.5.4
SMTP over SSL/Start TLS
Configure the settings for SMTP over SSL or Start TLS.
For details, refer to page 4-10.
10.5.5
SMTP Authentication
Configure SMTP authentication settings.
For details, refer to page 4-12.
10.5.6
POP before SMTP
Configure the settings for POP before SMTP.
For details, refer to page 4-13.
10.5.7
POP over SSL
Configure the settings for POP over SSL.
For details, refer to page 4-14.
10.5.8
APOP Authentication
Configure APOP authentication settings.
For details, refer to page 4-16.
Description
Sends a notification when the toner is empty.
Sends a notification when the capacity of the finisher tray
has been exceeded.
Sends a notification when a service call has occurred.
Sends a notification when the job has finished.
Sends a notification when you need to empty the punch
scrap box.
Sends a notification when the waste toner box needs to be
replaced.
Sends a notification when the drum unit or developing unit
needs to be replaced.
Sends a notification when the fusing unit needs to be re-
placed.
Sends a notification when the transfer roller unit needs to
be replaced.
Sends a notification when the transfer belt needs to be re-
placed.
Sends a notification when the ozon filter needs to be re-
placed.
10
Prior check
10-17