[Ike Settings]; [Sa Setting] - Muratec MFX-C2828 User Manual

8.9 Communicating using IPsec

[IKE Settings]

In the administrator mode of Web Connection, select [Network] ö [TCP/IP Setting] ö [IPsec] ö [IKE] ö
[Edit].
(Up to four groups can be registered for the IKE. )
Item
[Encryption Algo-
rithm]
[Authentication Al-
gorithm]
8.9.4 [SA]
In the administrator mode of Web Connection, select [Network] ö [TCP/IP Setting] ö [IPsec].
Item
[Lifetime After Es-
tablishing SA]

[SA Setting]

In the administrator mode of Web Connection, select [Network] ö [TCP/IP Setting] ö [IPsec] ö [SA] ö [Ed-
it].
(Up to eight groups can be registered for the SA. )
Item
[Security Protocol]
[ESP Encryption
Algorithm]
[ESP Authentica-
tion Algorithm]
[AH Authentication
Algorithm]
Description
Select an encryption algorithm to be used for creation of
the common key.
Select an authentication algorithm to be used for creation
of the common key.
Description
Enter a validation period of the common key that is used
for encrypted communication.
When this period has expired, a new key is created. This
can secure the communication.
Description
Select a security protocol to use.
If you have set the Security Protocol to [ESP], select the
ESP encryption algorithm.
If you have set the Security Protocol to [ESP], select the
ESP authentication algorithm.
If you have set the Security Protocol to [AH], select the AH
authentication algorithm.
8
Prior check
Prior check
Prior check
8-27