Smtp Authentication - Muratec MFX-C2828 User Manual

4.3 Sending scanned data by E-mail
Item
[Proxy Server Port
Number]
[User Name]
[Password is
changed.]
[Password]
[Address not using
Proxy Server]
4.3.4

SMTP Authentication

In the administrator mode of Web Connection, select [Network] ö [E-mail Setting] ö [E-mail TX (SMTP)].
Item
[SMTP Authentica-
tion]
[User ID]
[Password is
changed.]
[Password]
[Domain Name]
[Authentication
Setting]
Description
Enter the port number of a proxy server.
Enter the user name to log in to the proxy server (up to 63
characters).
Select this check box to change the password.
Enter the password to log in to the proxy server (up to 63
characters).
To enable expiration date confirmation, specify an ad-
dress that does not use the proxy server depending on
your environment.
If the DNS server has already been configured, you can
enter the host name instead.
When using IPv6, you can specify the IPv6 address.
Description
Select this check box to perform SMTP authentication.
For SMTP authentication, the authentication method with
the highest strength that is supported by the SMTP server
is automatically selected from Digest-MD5, CRAM-MD5,
PLAIN, and LOGIN.
Enter the user ID for SMTP authentication (up to 255
bytes).
Select this check box to change the password.
Enter the password for SMTP authentication (up to 128
bytes, excluding space and ").
Enter the domain name (realm) for SMTP authentication
(up to 255 characters).
This setting is required when the authentication method is
set to Digest-MD5.
If there is only one user domain (realm), you do not need
to enter this item because the domain name is reported
from the SMTP server at initial communication, and with
the domain name, a communication is established auto-
matically. If there are two or more user domains (realm),
specify the user domain name.
For user authentication, select whether to synchronize
SMTP authentication with user authentication.
Selecting [User Authentication] uses the user name and
password for user authentication as those for SMTP au-
thentication.
Selecting [Set Value] uses the values specified in [User ID]
and [Password].
4
Prior check
Server port number
Prior check
Is SMTP authentica-
tion requested by the
server?
Authentication Meth-
od
Synchronized with
user authentication?
4-12