Configuring The Administrator Password; [Administrator Password Setting] - Muratec MFX-C2828 User Manual

8.15

Configuring the administrator password

8.15 Configuring the administrator password
Configure the administrator password of this machine.

[Administrator Password Setting]

In the administrator mode of Web Connection, select [Security] ö [Administrator Password Setting].
Reference
- If [Enhanced Security Mode] is enabled, this menu item will not be displayed.
- If a device certificate has not been registered, this menu item will not be displayed .
- This menu does not appear if [Mode using SSL/TLS] is set to [None] in [Security] ö [PKI Settings] ö
[SSL Setting], when a device certificate is already registered.
Item
[Password is changed.]
[New Administrator
Password]
[Re-type New Adminis-
trator Password]
Reference
- You cannot register a password less than eight characters when [Security Settings] ö [Security Details]
ö [Password Rules] is set to [Enable] in the [Administrator Settings] on the Control Panel. If a user
password containing less than eight characters has already been registered, change the password so
that it contains eight characters before setting [Password Rules] to [Enable].
Description
Select this check box to change the password.
Enter a new administrator password (up to 8 characters, excluding space and
").
Enter the new administrator password again for confirmation.
8
8-39