Configuring The Network Settings - Muratec MFX-C2700 Configuration Manual

C
ONFIGURING THE NETWORK SETTINGS
Functions such as Scan To E-mail, Scan To Network PC and Internet Fax enable you to send
scanned data to a computer via the network connection. To use them, you need to set up
your machine and the computer to which you want to send scanned data.
First check your computer settings and fill in the information in the Your Value column of
the "Setup Information Form," on page
using the information in Your Value.
NOTE
Be sure to set up the network connection before continuing. Refer to the Setup
Guide supplied with the machine.
Table 1: Setup Information Form
NO. ITEM
Common Setup Information
A-1 Administrator password for your machine
A-2 IP address of your machine
Setup Information Required for Scan To Email and Internet Fax
B-1 Email address for your machine
B-2 SMTP server address
B-3 POP3 server address
B-4 Authentication method
B-5 SMTP user ID
B-6 SMTP password
B-7 POP user ID
B-8 POP password
B-9 Name of the email destination
B-10 Email address of the email destination
Setup Information Required for Scan To Network PC
C-1 Name of the destination computer
C-2 User name to log into the destination
computer
C-3 Password to log into the destination
computer
C-4 Profile name to register the settings
C-5 Shared folder name on the destination
computer
C-6 File name of the scanned data
9. Then, configure your machine and the computer
EXAMPLE
aaaaaa
192.168.0.2
mfxc2700@test.com
smtp.test.com
pop3.test.com
SMTP
muratec2700
muratec2700
user
omuratecc2700
User
user@test.com
PC1
mc2700
mc2700
Sales
SalesDev
ScanData
Configuring the network settings > 9
YOUR VALUE
(Up to 80 characters)
(Up to 32 characters)
(Up to 32 characters)
(Up to 16 characters)
(Up to 64 characters)
(Up to 64 characters)