Sinclair ASGE-09A Service Manual page 37

U-MATCH AIR CONDITIONERS
NO. Name
1 MODE button
2 Increasing button
3 Decreasing button
4 Fan speed button
5 Sleep/SWING button
6 Timer button
7 On/off button
8 Remote window
9 LCD display
Note：
SAVE set up ： At unit turned off, to press the "FAN" +"▼" buttons continuously 5 seconds, it can come
（1）
enter save set up interphase, the unit will run at save mode.
FRESH valve setup : At unit is turned off, press the " FAN" button for 5seconds,And set up the fresh air
（2）
setup.
Outer ambient temperature display: Under normal condition, "ENV" will display the room ambient
（3）
temperature, at unit turned on, or unit turned off status, press "SLEEP/SWING" button last for 5 seconds,
the LCD will display "OUT ENV".
MEMORY function setup: At unit turned off, press "MODE" button for 10 seconds, could switch
（4）
whether turn on or off the unit state after powered off.
Debugging function: At unit off, continuously press "FAN" + "SLEEP" buttons lasting for 10seconds,
（5）
call out debugging menu, and displays "Debugging" icons, use "MODE" button adjust setting item, by
pressing "▲", "▼" button to set up the detailed value.
(A) Ambient sensor set up: it can set three kinds styles.
Lock function: Press "▲"and"▼" at the same time for 5 seconds, the set temp. will display "EE" and
（6）
shield, all buttons will sound; and repress the"▲"and "▼"at the same time for 5 seconds, the lock
function will be released.
(for details, please read corresponding parts of manual).
Function description
Press the button to select the mode,
cooling , heating , fan or auto mode.
Press this button to increase the setup temp.
Press this button to decrase the setup temp.
Press this button to set fan speed
Press the button to set sleep/swing function
Press the button to set timer function
Press the button to set start or close unit
Get remote information
Display unit information
CONTROL
36