Sinclair ASGE-09A Service Manual page 159

Disassembly of air-deflecting motor
Remark: Make sure the air-deflecting motor in good condition and the power supply is cut off.
Step
Disassembly of
air-deflecting motor
Disassembly of connection rod modules on air-deflecting plate
Remark: Make sure the air-deflecting plate in good condition and the power supply is cut off.
Step
1. Disassembly of screws
2. Disassembly of
connection rod module
MAINTENANCE
Illustration
Illustration
Handling Instruction
Disassemble two
fitting screws on the
air-deflecting motor
and remove the motor.
Handling Instruction
Remove part of the
insulating sponge on
four corners on the
panel and remove the
two exposed screws.
The connection rod
modules on the
air-deflecting plate
shall be seen. (The
position of screws is
shown in the graph.)
Pull up the connection
rod and separate the
connection rod and
connection rod modules
with hands. Disassemble
the connecting screws
with screwdriver. (As is
shown in the graph,
arrow represents the
connetion rod and circle
the univeral joints.)
158