Sinclair ASGE-09A Service Manual page 152

Disassembly of evaporator components
Remark: Make sure the power supply is cut off and protect the copper tube and aluminum fin. If the time for disassembly shall
be long, put the copper tube under pressurized condition.
Step
Disassembly of
evaporator
components
Disassembly of fixing plate modules for air sweeping fans
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during disassembly.
Step
Disassembly of
fixing plate modules
for air sweeping
fans
Disassembly of right and left polystyrene foam plates modules
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during disassembly. Do not heat or
hit polystyrene foam modules.
Step
Disassembly of
right and left
polystyrene foam
plates modules
MAINTENANCE
Illustration
Illustration
Illustration
Handling Instruction
Disassemble the screws as
shown by the arrow in the
graph with screwdriver.
(There are 4 screws on left
and right of the evaporator
and 2 on evaporator outlet
press plate modules)
Handling Instruction
Disassemble the screws
shown in the graph with
screwdriver.
Handling Instruction
Remove the right and left
polystyrene foam plates modules
in the direction given by the
graph.
151