Sinclair ASGE-09A Service Manual page 157

Disassembly of water-containing plate
Remark: Cut off the power supply and make sure the power supply wires, signal wires and water-containing plate in good
condition.
Step
1. Disassembly of
cover panel of
electrical parts
box and flow
deflecting ring
2. Disassembly of
water-containing
plate
Disassembly of electrical parts box
Remark: Cut off the power supply and make sure the power supply wires, signal wires and electrical parts box in good
condition.
Step
Disassembly of
electrical parts box
MAINTENANCE
Illustration
Illustration
Handling Instruction
Disassemble the screws on
the electical parts box cover
panel and flow deflectin ring.
Remove the electrical parts box
and the power supply wires and
signal wires inside
electrical parts box connecting
with the electrical componets
under the water-containing
plate.
Disassemble the screws on
the four corners and pull
outside the water-containing
plate.(As is shown in the
graph, arrow represents the
water-containing plate. The
postition of screws are shown
in the box .)
Handling
Instruction
Disassemble
assembling screws
and pull upward to
remove
electrical parts
box.
156
the
4
the