Sinclair ASGE-09A Service Manual page 122

U-MATCH AIR CONDITIONERS
2. Disassembly of Vapor
liquid separator
3. Assembly of New vapor
liquid separator
Disassembly and Assembly of Axial Flow Fan and motor
Remark: Make sure power supply of the unit is cut down before removal of axial flow fan and motor.
Step
1. Disassembly of outer
parts
2. Disassembly of axial
flow fan
Illustration
MAINTENANCE
●Weld open two pipes
connecting vapor liquid
separator with pipe line
with gas welding.
●Remove
vapor liquid
separator.
●Position accurately new
vapor liquid separator.
●Connect new vapor liquid
separator with pipe line
using gas welding.
●Screw down two fixing
screws again at the
pothook.
Handling Instruction
●Handling Instruction
●Disassemble outer parts
of unit coping,
panel(external casing),
screen,etc. according to
the discription above in
order to disassemble axial
flow fan and motor
conveniently.
121