Sinclair ASGE-09A Service Manual page 146

Disassembly of drainage pump
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during disassembly.
Step
1. Disassembly of
fastening screws
on seal-plates of
inner panels and
the drainage pipe
2. Disassembly of
fastening screws
on the drainage
pump
3. Removal of
condensed water
drainage pump
Disassembly of water-containing plate
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during disassembly.
Step
1. Disassembly of
cover plate
2. Disassembly of
water-containing
plate
MAINTENANCE
Illustration
Illustration
Handling Instruction
Disassemble the fastening
screws on seal-plates of inner
panels and the pump drainage
pipe. Remove the seal-plates.(As
is shown in the graph, the circle
represents fastening screws on
seal-plates and box the fastening
screws on drainage pipe. All the 8
screws shall be disassembled. )
Disassemble the fastening
screws on the dreainage pump.
(As is shown in the graph, the
circle represents the position of
screws.)
Removed condensed water
drainage pump is shown in the
graph.
Handling Instruction
Disassemble the fastening screws on
the cover plate and remove the cover
plate. (As is shown in the graph, circle
represents 6 fastening screws under
the cover plate and
represents two fastening screws on
water-containing plate symmetrically
arranged both on left and right.)
Disassemble the fastening screws on
the water-containing plate, pull upward
and remove the water-containing plate.
Disassembled water-containing plate is
shown in the graph.
145
the box