Functions That Can Be Controlled From The Rcp-1001/1501 - Sony PXW-X320 Operating Instructions Manual

Functions That Can Be Controlled from the RCP-1001/
1501
You can adjust the functions in the following table by using menu operations, adjustment knobs, switches,
and the touch panel on the RCP-1001/1501.
For details on operations, refer to the operation manual of the RCP-1001/1501.
How to read the table
In the RCP-1001, and RCP-1501 columns of the table below, "Yes" and "No" mean the following.
Yes: The operation can be performed from the unit.
No: The operation cannot be performed from the unit.
Item Sub-item
Gain Step Gain
L/M/H
Step
Bars Bars
White AWB
Balance
ATW
5600K
Black ABB
Iris Iris Mode
Iris Level
Close
Camcorder Menu
Menu
Cancel/Preset
Select/Set
Panel Panel Active
Active
Standard Standard
ND Filter ND Filter
CC Filter CC Filter
Call Call
Setting Description
— Sets the master gain.
Low/Mid/High Switches between three gain levels, when
the master gain has been set from a menu.
–3/0/3/6/9/12/18/ Sets the master gain.
24/30/36/42dB
On/Off Turns color bar output on or off.
Start/Stop Starts execution of auto white balance
adjustment.
Stops execution if in progress.
On/Off Turns ATW on or off.
On/Off Turns color temperature conversion on or
off.
Start/Stop Starts execution of auto black balance
adjustment.
Stops execution if in progress.
Auto/Manual Selects the iris mode.
–99 to ±0 to +99 Adjusts the level of the auto iris target
value.
On/Off Turns forcible iris closing on or off.
On/Off Operates the camcorder menu.
Cancel/Preset
Select (Up/
Down)/Set
On/Off Enables (On) or disables (Off) panel
operations.
On/Off Selects standard mode.
Display only Turns the display of ND filter settings on
or off (settings cannot be changed, only
displayed.)
A/B/C/D Selects a CC filter.
On/Off Enables (On) or disables (Off) calls from
externally connected equipment.
77
RCP-1001/1501
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes