Gain Selector - Sony PXW-X320 Operating Instructions Manual

Solid-state memory camcorder
Hide thumbs Also See for PXW-X320:
Table of Contents

Advertisement

Right side (near the front)
a ASSIGN. (assignable) 1/2/3 switches
You can assign the desired functions to these
switches on "OPERATION" > "Assignable SW"
in the setup menu (see page 158).
The ASSIGN.1/3 switches are provided with an
indicator to show whether a function is assigned
to the switch (ON) or not (OFF).
b COLOR TEMP. (color temperature)
button
You can also use this button as an assignable
switch (see page 159).
c ALARM (alarm tone volume
adjustment) knob
Controls the volume of the warning tone that is
output via the built-in speaker or optional
earphones. When the knob is turned to the
minimum position, no sound can be heard.
However, if "MAINTENANCE" > "Audio" >
"Min Alarm Volume" in the setup menu is set to
"Set," the alarm tone is audible even when this
volume control is at the minimum position.
Minimum
d MONITOR (monitor volume
adjustment) knob
Controls the volume of the sound other than the
warning tone that is output via the built-in speaker
or earphones. When the knob is turned to the
minimum position, no sound can be heard.
e MONITOR (audio monitor selection)
switches
By means of combinations of the two switches,
you can select audio that you want to hear through
the built-in speaker or earphones.
Position of lower switch: CH-1/2
Position of upper
switch
CH-1/CH-3
MIX
CH-2/CH-4
Position of lower switch: CH-3/4
Position of upper
switch
CH-1/CH-3
MIX
CH-2/CH-4
a) By connecting stereo headphones to the EARPHONE
jack, you can hear the audio in stereo.
("MAINTENANCE" > "Audio" > "Headphone Out"
in the setup menu must be set to "Stereo.")
f ASSIGN. (assignable) 0 switch
You can assign the desired function to this switch
on "OPERATION" > "Assignable SW" in the
setup menu (see page 158).
This is a momentary type switch. Each press of
the switch turns the function assigned to this
switch on or off.
g GAIN selector
Switches the gain of the video amplifier to match
the lighting conditions during shooting. The gains
13
ALARM
Maximum
Audio output
Channel 1 audio
Channels 1 and 2 mixed
a)
audio (stereo)
Channel 2 audio
Audio output
Channel 3 audio
Channels 3 and 4 mixed
a)
audio (stereo)
Channel 4 audio

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents