Functions That Can Be Controlled from the RCP-1001/
1501
You can adjust the functions in the following table by using menu operations, adjustment knobs, switches,
and the touch panel on the RCP-1001/1501.
For details on operations, refer to the operation manual of the RCP-1001/1501.
How to Read the Table
In the RCP-1001, and RCP-1501 columns of the table below, "Yes" and "No" mean the following.
Yes: The operation can be performed from the unit.
No: The operation cannot be performed from the unit.
Menu
Sub-item
items
Gain
Step Gain
L/M/H
Step
Bars
Bars
White
AWB
Balance
ATW
5600K
Black
ABB
Iris
Iris Mode
Iris Level
Close
Camcorder
Menu
Menu
Cancel/Preset
Select/Set
Panel
Panel Active
Active
Standard
Standard
ND Filter
ND Filter
CC Filter
CC Filter
Call
Call
74
Functions That Can Be Controlled from the RCP-1001/1501
Setting
Description
–
Sets the master gain.
Low/Mid/High
Switches between three gain levels, when
the master gain has been set from a menu.
–3/0/3/6/9/12/18/
Sets the master gain.
24/30/36/42dB
On/Off
Turns color bar output on or off.
Start/Stop
Starts execution of auto white balance
adjustment, or stops execution.
On/Off
Turns ATW on or off.
On/Off
Turns color temperature conversion on or
off.
Start/Stop
Starts execution of auto black balance
adjustment, or stops execution.
Auto/Manual
Selects the iris mode.
–99 to ±0 to +99 Adjusts the level of the auto iris target
value.
On/Off
Turns forcible iris closing on or off.
On/Off
Operates the camcorder menu.
Cancel/Preset
Select (Up/
Down)/Set
On/Off
Enables (On) or disables (Off) panel
operations.
On/Off
Selects standard mode.
Display only
Turns the display of ND filter settings on
or off. (The settings cannot be changed,
only displayed.)
A/B/C/D
Selects a CC filter.
On/Off
Enables (On) or disables (Off) calls from
externally connected equipment.
RCP-1001/1501
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes