Chapter 5 : Clip Operations; Clip Playback; Thumbnail Screen - Sony PXW-X320 Operating Instructions Manual

5 Clip Operations
Chapter

Clip Playback

A thumbnail screen appears if you press the THUMBNAIL button in E-E or playback mode. Thumbnail
screens display lists of the clips stored on SxS memory cards in the form of index pictures. (A message
appears if you insert a memory card that contains no clips.)
You can select any clip (see page 97) in a thumbnail screen and start playback of that clip (see page 97).
To exit the thumbnail screen, press the THUMBNAIL button again.

Thumbnail Screen

In thumbnail screens, the timecode of the index picture appears beneath the thumbnail for each clip. (An
OK mark also appears when a clip has been marked with an OK mark.)
The clip information on the cursor location is displayed at the bottom of the screen.
Cursor
(yellow)
a Index picture
UDF, exFAT, FAT-HD mode: When a clip is
recorded, its first frame is set automatically as the
index picture. You can change the index picture
to any frame (see page 106). If the clip is locked
The icon of the currently selected SxS memory card is highlighted.
(If the card is write protected, a lock mark appears on the left.)
96
Clip number/Number of clips
or the OK mark is on the clip, the lock mark
appears.
FAT-SD mode: When a clip is recorded, its first
frame is set automatically as the index picture. If
the file size is larger than 2 GB, and that the clip