Color Temperature - Sony PXW-X320 Operating Instructions Manual

b Zoom position (when the lens is
mounted)
Indicates the zoom position of the zoom lens in
the range from 0 to 99.
c Focus position (when the serial lens is
mounted)
Indicates the focus position as distance to the
subject (in units of m).
d Green tally indicator
Lights when the camcorder is the following
states.
• "MAINTENANCE" > "Camera Config" > "HD
SDI Remote I/F" is set to "G-Tally" in the setup
menu and a recording control signal is output
from the HD/SD SDI OUT connector.
• Green tally signal received (when a camera
adaptor is mounted on the camcorder and a
camera control unit is connected)
e Media status
Displays the name of the currently active media
slot (A or B).
f Recording mode/operation status
indicator
Indicator Meaning
zREC Recording in progress
STBY Standby for recording
zCACHE
Standby in Picture Cache mode
zINT REC
Recording in progress in
Interval Rec mode
zINT STBY Standby for next recording in
Interval Rec mode
INT STBY Standby in Interval Rec mode
zFRM REC Recording in progress in Frame
Rec mode
zFRM STBY Standby for next recording in
Frame Rec mode
FRM STBY Standby in Frame Rec mode
zS&Q REC Recording in progress in Slow
& Quick Motion mode
S&Q STBY Standby in Slow & Quick
Motion mode
zCALL Being called from a connected
device
BREVIEW
During recording review
g Wireless receiver reception level
When a wireless receiver is installed in the
camcorder, "W" appears together with the
following four segment reception level indicators
for each of the channels (1 to 4) that can be used
by the receiver.
In normal situation: The number of white
segments indicates the strength of the signal
level.
Muting (for an analog receiver) or error rate
aggravation (for a digital receiver): The
number of gray segments indicates the
strength of the signal level.
Reception level over peak: "P" is displayed
instead of the indicators.
Tuner battery is low: The channel number and
indicator of the corresponding channel
1)
flash.
1) When an optional DWR-S02D is used
h Battery remaining/voltage display
Type of power
source
InfoLithium
battery
Anton Bauer
battery
Other type than
above
i External power input
Appears when power is supplied from an external
power source connected to the DC IN connector.
j ALAC (automatic lens aberration
correction) status
Appears when "ALAC" (see page 145) of the
MAINTENANCE menu is set to "AUTO," and
an ALAC compatible lens is attached to the
camcorder.
k Color temperature
Displays a color temperature calculated from the
gain of R and B, in the range 1.5 K to 50.0 K (in
steps of 0.1 K). The +/– signs may be displayed
depending on the "Offset White" setting (see
page 127).
No display: "Offset White" is "Off."
+: The value of "Offset White" is greater than
3200K.
25
1)
Indicator
Remaining battery capacity
icon and remaining recording
time
Remaining battery capacity (%
indication)
Input voltage