Slot Cover; External Device Connector; Hdmi Output Connector - Sony PXW-X320 Operating Instructions Manual

Left side and upper section
a ASSIGNABLE 4/5 switches
You can assign the desired function to this switch
on "OPERATION" > "Assignable SW" in the
setup menu (see page 159).
Off is assigned to these switches when the
camcorder is shipped from the factory.
b PC connector
Used to put this camcorder into USB connection
mode and use it as an external storage device for
a computer. When a computer without
ExpressCard slot is connected to this connector,
every memory card inserted in the camcorder is
recognized as a drive for that computer.
c External device connector
Connect an optional CBK-WA101 Wireless
Adapter, IFU-WLM3 USB Wireless LAN
Module, or USB flash drive.
When connecting the CBK-WA101/IFU-
WLM3: You can connect the camcorder and
computer via wireless LAN connection.
When connecting a USB flash drive: You can
record, store, or load the following data.
• Planning metadata (see page 93)
• Setting data file (see page 164)
Note
Use this connector only for connecting the CBK-
WA101, IFU-WLM3, USB flash drive, or USB media.
Do not connect and use a USB hub or similar products.
For details about wireless LAN connection, see
"Using Wireless LAN Connection" (page 79).
d SxS memory card slots
These two slots (A and B) can receive SxS
memory cards or other recording media (see
page 61).
e ACCESS lamps
Indicate the state of slots A and B (see page 61).
You can check whether the lamps are lit even
when the slot cover is closed.
f EJECT (SxS memory card eject)
buttons (see page 61)
g Slot cover
Slide to the left and right to open and close.
h SLOT SELECT (SxS memory card
select) button (see page 61).
i HDMI output connector
When a video monitor provided with an HDMI
signal input connector is connected to this
connector, you can monitor picture being shot
(camera picture) or playback picture.
18