Table of Contents
Advertisement
OPERATION
Item
Input/Output
Makes settings related to
I/O signals.
Super Impose
Makes settings related to
superimposed text and
markers.
Sub-item
Setting
SDI/HDMI Out
On/Off
Super
Video Out Super On/Off
Down Converter Squeeze/Letter/
Crop
Through/Auto
Wide ID
On/Off
Super(VF
Display)
On/Off
Super(Menu)
Super(Timecode) On/Off
Super(Marker)
On/Off
Super(Rec Status
On/Off
Indicator)
Description
Turns on/off the superimposition of text
information on the output of the HD/SD
SDI OUT and HDMI connectors.
Turns on/off the superimposition of text
information on the output of the VIDEO
OUT connector.
Selects the signal conversion mode for
output of SD signals.
Squeeze: Squeeze the 16:9 picture
horizontally and output as a 4:3
picture.
Letter: Mask the top and bottom of the
4:3 picture and display in the center
of the screen as a 16:9 picture.
Crop: Crop the edges of the 16:9
picture and output as a 4:3 picture.
Selects whether to add a wide ID signal
to the SD output signal.
Through: Output without adding a
wide ID signal.
Auto: Add and output a wide ID signal
when the Down Converter setting
is Squeeze.
When "Input/Output" > "SDI/HDMI
Out Super" or "Video Out Super" is set
to "On," superimpose text information
on the output from the HD/SD SDI
OUT connector, HDMI connector, and
VIDEO OUT connector, as specified
("On" or "Off") for each item.
When "Input/Output" > "Video Out
Super" is set to "On," specifies whether
to superimpose markers on the output
from the VIDEO OUT connector.
Selects whether to superimpose ("On")
or not impose ("Off") the recording
status indication on the following two
outputs.
• Output from the VIDEO OUT connector
with "Input/Output" > "Video Out
Super" set to "On"
• Output from the SDI connector and the
HDMI connector with "Input/Output" >
"SDI/HDMI Out Super" set to "On"
118
- Quick Links:
- Recording Time-Lapse Video
Hide quick links:
Advertisement
Table of Contents
