Video Format; Number Of System Lines - Sony PXW-X320 Operating Instructions Manual

Solid-state memory camcorder
Hide thumbs Also See for PXW-X320:
Table of Contents

Advertisement

–: The value of "Offset White" is less than
3200K.
l Number of system lines
Indicates the number of system lines (1080/720/
576/480) of video currently being recorded or
played back.
m Video format
Indicates the video format (see page 44).
The video aspect ratio (16:9 or 4:3) can also be
displayed when the recording format is set to
DVCAM.
n Depth of field indicator (when the serial
lens is mounted)
Error/warning indicator
A bar indicates the depth of field. The display unit
is meters or feet, as selected on "OPERATION"
> "Display On/Off" > "Lens Info" in the setup
menu.
An error or warning message is displayed here
depending on the situation.
Under this area, you can also display the name of
the next clip to be recorded (see page 130).
o Special recording mode indicator
The following is displayed when the camcorder is
in a special recording mode.
• Frame Rec (frame recording mode)
• Interval Rec (interval recording mode)
• S&Q Motion (Slow & Quick Motion mode)
p Special recording mode settings
indicator
Appears when the camcorder is in a special
recording mode.
Bottom of viewfinder screen
a TLCS iris control mode
Icon
TLCS control mode
Backlight mode
Standard mode
STD STD
Spotlight mode
b Focus adjustment mode (when the auto
focus lens is mounted)
Indicates the current focus adjustment mode of
the camcorder.
• AF (Auto Focus mode)
• MF (Manual Focus mode)
• MF* (Manual Focus mode when the MF Assist
function is on)
• Full MF (Full Manual Focus mode)
c External device control
"Rec2" is displayed when "MAINTENANCE" >
"Camera Config" > "HD SDI Remote I/F" is set
to "Chara" in the setup menu and a recording
control signal is output from the HD/SD SDI
OUT connector.
"Rec2-P" is displayed when "MAINTENANCE"
> "Camera Config" > "HD SDI Remote I/F" is set
to "Para Rec" in the setup menu and synchronized
recording is performed with a compatible device.
d Operation status of connected i.LINK
device
Indicator
Meaning
zREC
HDV recording in progress
STBY
Standby for HDV recording
26
.
E
xt

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents